#Nexigo webcam settings app manuals#
#Nexigo webcam settings app install#
#Nexigo webcam settings app software#
#Nexigo webcam settings app download#
#Nexigo webcam settings app free#

The quality of the signal can be affected by low bandwidth availability or insuffcient lighting. Q2: What is the video recording frame-rate?Ī: The NexiGo webcam captures clear images and can record video at 1080p/60fps in a well-lit environment. Navigate to the USB section and check if the webcam is listed as a connected device (like the photo below): The System Information window for your Mac will appear. Click on System Report from the pop-up window that appears. To verify the webcam is connected on a Mac computer, click the Apple Menu (in the top left corner of your screen) and then click About this Mac. To ensure the camera has installed correctly on a Windows computer check under Control Panel> System and Security>Device Manager. It will take a few seconds for the camera to be recognized after it is connected to the system. Q1: How do I know if my camera is being recognized by the system?Ī: Connect the camera to any USB 2.0 or USB 3.0 port.

this device must accept any interference received, including interference that may cause undesired operation.

this device may not cause harmful interference, and.

Operation is subject to the following two conditions: This device complies with Part 15 of the FCC Rules. (Both parties need a webcam and the same video application.) FCC REQUIREMENTĪny changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

#Nexigo webcam settings app install#

At the top of your screen, click Camera in the app menu, and select the Full HD Webcam from the list of options.ġ) A computer with speakers (or a headset), your NexiGo webcam, and a microphone Ģ) Install a video-calling application such as Skype, FaceTime, Zoom, or Hangouts. To see an image from your camera in Photo Booth, you may need to select the camera from the list of attached devices in the app.

To begin, select the Finder button, click Applications, and select Photo Booth.Īlternately, click the Search button in your menu bar, type “photo booth” (without the quotation marks), and press return. This will allow you to preview the camera images, capture still frames, and record video clips. Mac users can use the Photo Booth app, which is pre-installed with the OS.

At the top right or left of your screen click the cycle camera icon (the arrow chasing itself, not the gear), and keep switching until you get to the NexiGo webcam. To view your webcam video you may need to select “the NexiGo camera” from the list of other devices. Scroll through the list of programs there until you get to the “C” section, the Camera application will be listed there. Alternatively, go to the Start menu at the bottom right corner of the screen and left click. To ﬁnd the Camera app type “camera” (without the quotation marks) in the search bar at the bottom of the screen and press enter. Windows users can use the Camera app, which is pre-installed with Windows. If you still have trouble connecting the Webcam, please refer to FAQ sections starting from.

On Mac: Select Apple menu>System Preferences> Security & Privacy>Privacy>Camera, and select which apps you want to use the camera.

In Windows: Select Settings>Privacy>Camera, turn on allow apps to access your camera.

If you cannot use the camera within other apps, you will need to enable access.

Make sure you are connected to your network before starting the setup.

CONNECT THE WEBCAM TO YOUR COMPUTER USING THE USB CABLE.

Chrome OS V29.01547 or above SETTING UP YOUR WEBCAM.

Photo Booth for macOS) System requirements Photo or video: Using system Camera App (Camera for Windows.

#Nexigo webcam settings app software#

Streaming software: Open Broadcaster Software and Xsplit 640×480©60fps Sensor 1/2.9-inch CMOS digital image sensor Focus type Auto Focus Field of view D=78º/H=65ºN=39º Application support Chat software: Skype. SPECIFICATION Video resolution 1920×1080©60fps. Press and hold the Touch Control Area to adjust the brightness steplessly from 10% to 100%.Tap the Touch Control Area to switch the light color between White, Warm, and Natural.From brightness to focus, from saturation to hue, ﬁnd the look that highlights the best you!ĭownload the NexiGo Webcam Setting Software /softwareģ. The NexiGo Webcam Settings software allows you to change almost every setting for your webcam.

#Nexigo webcam settings app download#

Just head on over to /software to download it.

#Nexigo webcam settings app free#

NexiGo is proud to introduce the new NexiGo Webcam Settings software! Free of charge to all our loyal NexiGo customers, use it to enhance your experience with your webcam. Tel: +1(458) 215-6088 NEXIGO WEBCAM SETTINGS SOFTWARE

#Nexigo webcam settings app manuals#

10.1 Related Manuals / Resources CONTACT INFORMATIONĪddress: 11075 SW 11th St, Beaverton, OR, 97005, US